Ash Technologies Prisma AF Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Лупи Ash Technologies Prisma AF. Ash Technologies Prisma AF 12 сторінок.

switch to photo setting when in mirror mode and

switch back to the last reading mode when returned

to the reading position. You should try to keep the

Prisma AF close to the TV screen for ease of use.

Focus lock

Press Mode and Overview simultaneously to turn off

the autofocus facility. Repeat to re-enable autofocus.

If you wish to turn off the LED lighting then, with the

unit powered off, press Zoom Up and power the unit

on. Repeat to allow the lighting to function again.

The sounds can be disabled by Pressing Zoom

Down while powering on the unit. Repeat to enable

the sounds again.

Press Mode while powering-on the Prisma AF to

restore factory settings for sound, lighting and

brightness settings.

Do not touch the lens. Dirt on the lens will appear as

a blurred or dim image or as fuzzy spots on the

screen. If you believe the lens is dirty, it can be

cleaned with a soft, dry cloth applying minimal

pressure. As the lens is polished and coated, do not

use a wet or coarse cloth, avoid detergents and

abrasive substances or solvents to clean it.

Page 9

Prisma AF English Rev 1.00