Ash Technologies Eclipse Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ash Technologies Eclipse. Ash Technologies Eclipse 15 pages.
Imprimer la pageway down the screen. You can use this line to underline the line of text
you are reading by moving the table appropriately.
The second press of the function button will display the shutters. These
blank the text at the top and bottom of the screen leaving an area in the
centre to read. The distance between these shutters can be adjusted,
as can the position of the centre area on the screen. To adjust the
shutters, use
the centre function button). The unit will beep to indicate that you are
entering the shutter adjustment mode. You can use the Zoom buttons
to widen or reduce the reading area. Pressing the function key will exit
the adjustment mode. If you do not press a key for five seconds the
Eclipse will automatically exit the adjustment mode anyway.
Ideally, you should set your desired magnification level then set the
distance between the shutters to suit the size of text on the screen.
Pressing the function key a third time will clear the shutters, returning to
full screen reading mode.
5C.
Colours (User Defined)
Some users may benefit from setting the ink and paper to colours
other than black and white. The Eclipse offers four of the most
commonly used preset colour options and one user-definable option
where the ink and paper colours may each be chosen from any of eight
fore- and background colours.
The colour options are only available in reading mode. Pressing the
assigned function button will cycle through the options available
(including the user-defined option).
If none of the presets work for you (or if you wish to experiment) you can
set the user-defined option by using
focus button and press the rightmost function button). The unit will beep
to indicate that you are entering the colour selection mode. You can
use the Zoom buttons and brightness buttons to set the ink and paper
colours. Note that you cannot display the same colour for ink and
paper. Pressing the function key again will exit the adjustment mode. If
+
(i.e. press and hold the focus button and press
+
Page 9
(i.e. press and hold the
Rev E US EN