Ash Technologies Eclipse Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyaji Digital Ash Technologies Eclipse. Ash Technologies Eclipse 15 halaman.

way down the screen. You can use this line to underline the line of text

you are reading by moving the table appropriately.

The second press of the function button will display the shutters. These

blank the text at the top and bottom of the screen leaving an area in the

centre to read. The distance between these shutters can be adjusted,

as can the position of the centre area on the screen. To adjust the

shutters, use

the centre function button). The unit will beep to indicate that you are

entering the shutter adjustment mode. You can use the Zoom buttons

to widen or reduce the reading area. Pressing the function key will exit

the adjustment mode. If you do not press a key for five seconds the

Eclipse will automatically exit the adjustment mode anyway.

Ideally, you should set your desired magnification level then set the

distance between the shutters to suit the size of text on the screen.

Pressing the function key a third time will clear the shutters, returning to

full screen reading mode.

5C.

Colours (User Defined)

Some users may benefit from setting the ink and paper to colours

other than black and white. The Eclipse offers four of the most

commonly used preset colour options and one user-definable option

where the ink and paper colours may each be chosen from any of eight

fore- and background colours.

The colour options are only available in reading mode. Pressing the

assigned function button will cycle through the options available

(including the user-defined option).

If none of the presets work for you (or if you wish to experiment) you can

set the user-defined option by using

focus button and press the rightmost function button). The unit will beep

to indicate that you are entering the colour selection mode. You can

use the Zoom buttons and brightness buttons to set the ink and paper

colours. Note that you cannot display the same colour for ink and

paper. Pressing the function key again will exit the adjustment mode. If

(i.e. press and hold the focus button and press

Page 9

(i.e. press and hold the

Rev E US EN