1010music Toolbox Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 1010music Toolbox. 1010music Toolbox 16 pages.
Également pour 1010music Toolbox : Manuel de démarrage rapide (2 pages)
Imprimer la page
knobs to move the cursor through the bars. Turn the right control knobs to adjust the height of the bar at
the currently selected step.
9.
Touch the grid icon in the top left corner, or press HOME to return to the Main screen.
Note:
The CV Sequencer Screen always shows the same number of steps and allows the cursor to move to
•
all of the steps. However, only the number of steps selected in the Step Count parameter will be
used during playback.
To set the value of a step to 0, use the control knobs to adjust the value.
•
If a value of a CV Sequencer parameter is changed during playback of the sequence, the change will
•
take effect at the start of the next loop through the sequence.
Apply Modulation
Toolbox provides the ability to modulate parameters using internal signals and external CV inputs. The following
parameters are
Modulation Targets
Sound Element
Parameter
Note Sequencer
Step
Length
Note Sequencer
Step Count
Note Sequencer
Transpose
To apply a modulator to a specific modulation target:
1.
From the Main screen, touch one of the Note Sequencers to display the Note Sequencer screen.
2.
Press the INFO button to display the Note Sequencer Parameters screen.
3.
The parameters that can be modulated will have three black boxes below them. This allows you to apply up
to three modulators to each of these parameters. Touch one of the boxes below a parameter to open the
Modulation Selection Screen
4.
Adjust the modulation parameters by turning the Control Knob closest to the parameter.
Parameter
Description
Source
The source of modulation to be
applied.
Amount
Choose the amount of
modulation that will be applied.
5.
Once you have selected all the settings, touch the arrow (
or press HOME to go back to the parameters screen.
6.
Touch another black box below a parameter to add more modulation.
7.
Press HOME to return to the Main screen.
Synchronizing with Other Modules
Toolbox is designed to work together with other modules. It can follow an external clock input and then use that to
control the CV and MIDI outputs to other modules. The toolbox clock can be driven by three sources, and will use the
highest priority clock signal available. The sources, in decreasing order of priority are:
1.
CV clock input in the Clock Input jack
2.
MIDI Clock from the MIDI Input jack
3.
Internal free running clock
When a MIDI Clock is used, toolbox responds to MIDI clock pulse, play and stop signals. When a MIDI play signal is
received, the playback of the module resumes from the beginning, and the play signal is passed along to the MIDI
11/23/17 10:32 AM
because modulation can be applied to them:
Example usage
Use an LFO square wave to change the rhythm of a sequencer between
two different durations.
Use an LFO to adjust the number of steps to add variation.
Use an LFO to add movement to the pitch and variety to the sequence.
.
Range of Values
None
•
•
LFO1
•
•
LFO2
•
•
LFO3
•
•
-100% to +100%
) in the top left
<-
Digital Heart – Analog Soul
Toolbox User Manual
SEQ
EXT1
EXT2
EXT3
Figure 1 6: Mo dulation
Selection Screen
Copyright 1010music LLC 2017
P. 13