Cypress CPT-386 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Cypress CPT-386. Cypress CPT-386 8 pages. Pc to component scan converter

Imprimer la page

3. Hardware Description

The following sections describe the hardware components.

3.1. Top Panel

PC to Component

1 Power switch and LED Indicator: When power is turned on the LED will

illuminate in green color. When press power switch once to turn the system

in standby mode and the LED will illuminate in red color.

Note: The factory setting is in power on mode.

3.2. Front Panel

INPUT

1 PC Input: Connect the PC input port to the output port of your computer

(desktop, notebook/laptop, or device providing PC resolution output),

using D-Sub 15-pin cable.

2 Power Supply: Plug the 3.3V DC 1A power supply into the unit and connect

the adaptor to AC wall outlet.

3 Component Output: Connect the component output port to the input port

of your display, using 3 RCA cable.

POWER

3.3 V

3.3. Rear Panel

OUTPUT