Dolphin BC 2012 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dolphin BC 2012. Dolphin BC 2012 12 pages. Automatic velocity hand dryer

Imprimer la page

Self-check indicator

When a malfunction or error occurs, the self-check indicator located on the top of the dryer

"check" will either light up or flash.

Turn off the power switch, wait about 40 seconds until all the indicators go off, and then turn

the dryer back on.

If the indicator still lights up or flashes, turn off the unit, Isolate the dryer from the mains supply

and contact a service engineer.

Routine Cleaning & Maintenance of the hand dryer

Cleaning the body of the hand dryer

Clean the unit with a soft cloth.

If the unit gets very dirty, clean with a soft damp cloth with a neutral cleaning agent, then

clean with a dry soft cloth.

Remove any dirt from the sensor area.

Only use a neutral cleaning agent.

Do not use thinners, acidic or alkaline toilet cleaners, or any type of brushes. (use of these

may damage the surface of the hand dryer.

If chemical cloths are to be used, please read their instructions first.

Draining and cleaning the drain tank

Before the tank fills up (at least once a week)

The water blown off your hands when drying is called

"drain water"

Empty the drain water at any time, in order to prevent

accumulated water from exceeding the full level.

The water in the tank may start smelling if it remains in the tank

for too long.

Pull the drain tank out in a horizontal direction as indicated.

This ensures the drain water does not spill out.

BC 2012 User Manual

The Hand dryer must be isolated from the power

supply before any cleaning and maintenance takes place.

Caution always wear suitable gloves when cleaning

Warning:-

Full level