Dolphin BC633F Manuel d'installation et d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dolphin BC633F. Dolphin BC633F 18 pages. Electronic foam soap dispenser

Imprimer la page

INSTALLATION

Step 3 – Connecting the power source

Remove the protective sticker covering

the sensor.

Connect the soap dispenser pump

connector to its matching connector

on the electronic unit. Please note that

since the connector is waterproof,

some pressure must be applied for a

perfect seal.

IMPORTANT: the 4 contacts connector should be connected properly so that the

white o-ring is not visible and a clicking sound is heard.

PAY ATTENTION : If the 4 contacts connectors are not connected properly, the

soap dispenser pump will not operate properly.

3. Plug the transformer into the electricity

socket and connect the transformer

connector

4. Wait about 10 seconds before placing

your hands in the sensor range to avoid

adjustment mode.

O-RING VISIBLE –

NOT CONNECTED PROPERLY L L

ONLY L L THE GROOVES ARE VISIBLE –

CONNECTED PROPERLY L L

FROM THE TRANSFORMER

TO THE SOAP DISPENSER

ABOUT

SECONDS

BC 633F

Dolphin