Dolphin BC633F Manual de instalação e manutenção - Página 9
Procurar online ou descarregar pdf Manual de instalação e manutenção para Dispensador Dolphin BC633F. Dolphin BC633F 18 páginas. Electronic foam soap dispenser
Imprimir página
INSTALLATION
Step 3 – Connecting the power source
1
Remove the protective sticker covering
the sensor.
2
Connect the soap dispenser pump
connector to its matching connector
on the electronic unit. Please note that
since the connector is waterproof,
some pressure must be applied for a
perfect seal.
IMPORTANT: the 4 contacts connector should be connected properly so that the
white o-ring is not visible and a clicking sound is heard.
PAY ATTENTION : If the 4 contacts connectors are not connected properly, the
soap dispenser pump will not operate properly.
3. Plug the transformer into the electricity
socket and connect the transformer
connector
4. Wait about 10 seconds before placing
your hands in the sensor range to avoid
adjustment mode.
O-RING VISIBLE –
NOT CONNECTED PROPERLY L L
ONLY L L THE GROOVES ARE VISIBLE –
CONNECTED PROPERLY L L
FROM THE TRANSFORMER
TO THE SOAP DISPENSER
ABOUT
SECONDS
BC 633F
|
Dolphin
|
9