Dolphin BC633F Manual de instalação e manutenção - Página 11
Procurar online ou descarregar pdf Manual de instalação e manutenção para Dispensador Dolphin BC633F. Dolphin BC633F 18 páginas. Electronic foam soap dispenser
Imprimir página
SETTINGS ADJUSTMENT WITH A
REMOTE CONTROL
If available, the foam dispenser remote control can adjust the dispenser's settings.
To use the remote control hold it in front of the sensor at a distance of 10-15cm
(4-6"). Attention: The remote control will not operate out of the recommended
range (too close or too far).
The remote control can be used to adjust the following functions:
1-SOAP QUANTITY
Press the + sign on the SOAP button to increase the soap quantity by increasing
the dispensing time. Press the - button to decrease it. Indication: continuous blinking
blue light in the sensor eye.
2-AIR QUANTITY
To improve soap consistency ("foamability) change the amount air to be mixed.
Press the + sign on the AIR button to increase the air quantity and the - to
decrease it. Indication: 2 blinks of the blue light in the sensor eye.
3-RES
This function resets the sensor back to its factory settings.
4-TEMPORARY OFF FUNCTION
This function temporary disables the
dispenser. Use this function to preform
maintenance in front of the sensor without
activating the system (for example:
cleaning). The soap dispenser will shut off
for one minute after this button is pressed
once. To return to normal operation before
the minute is over, press the On/Off button
again.
5-FILL THE SOAP TANK
Once the soap tank has been filled \ refilled,
press the FILL button. The pump will run for
one minute, priming the piping with soap.
Once soap begins dispensing from the
spout, priming is complete. press the FILL
button again to stop the priming before the
minute is over. Indication: continuous solid
blue light in the sensor eye.
4
1
5 5
BC 633F
2
3
|
Dolphin
|
11