Dolphin BC633F Manual de instalação e manutenção - Página 13
Procurar online ou descarregar pdf Manual de instalação e manutenção para Dispensador Dolphin BC633F. Dolphin BC633F 18 páginas. Electronic foam soap dispenser
Imprimir página
MAINTENANCE
Care and cleaning of chrome and special finishes
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or
their like. Use of any prohibited cleaning or maintenance products or substances
could damage the surface of the soap dispenser. For surface cleaning use ONLY
soap and water, then wipe dry with a clean cloth or towel. When cleaning
bathroom tiles, the soap dispenser should be protected from any splattering of
harsh cleansers.
Disassemble of the soap pipe from the pump
The soap pipe can be disconnected from the soap pump by a simple slide & pull
action. The sliding ring of the quick connection fixation nipple on the pump should
be pulled down. It releases the open end of the soap pipe which can then be easily
pulled out.
Filter cleaning instructions (foam dispenser only)
This soap dispenser is provided with a foam filter. It is recommended to clean the
filter every six (6) months. If the soap supply has decreased, this may be caused by
the clogged filter. The filter can be cleaned as follows:
1. Use a wrench to unscrew the quick connection fitting from the foam
compressor and pull out the filter housing.
2. Remove the filter from the housing.
3. Replace the filter (recommended) or wash it under running water for a
temporary fix.
4. Reassemble the parts.
Clean the soap tank
Clean out the tank prior to refill by flushing warm water through the hoses and
pump until clean water is released from the spout. TIP: Keeping a spare tank will
enable this process to be completed in a speedy and hygienic manner with minimal
downtime.
|
Dolphin
BC 633F
|
13