Dolphin BC633F 설치 및 유지 관리 매뉴얼 - 페이지 13

{카테고리_이름} Dolphin BC633F에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin BC633F 18 페이지. Electronic foam soap dispenser

MAINTENANCE

Care and cleaning of chrome and special finishes

DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or

their like. Use of any prohibited cleaning or maintenance products or substances

could damage the surface of the soap dispenser. For surface cleaning use ONLY

soap and water, then wipe dry with a clean cloth or towel. When cleaning

bathroom tiles, the soap dispenser should be protected from any splattering of

harsh cleansers.

Disassemble of the soap pipe from the pump

The soap pipe can be disconnected from the soap pump by a simple slide & pull

action. The sliding ring of the quick connection fixation nipple on the pump should

be pulled down. It releases the open end of the soap pipe which can then be easily

pulled out.

Filter cleaning instructions (foam dispenser only)

This soap dispenser is provided with a foam filter. It is recommended to clean the

filter every six (6) months. If the soap supply has decreased, this may be caused by

the clogged filter. The filter can be cleaned as follows:

1. Use a wrench to unscrew the quick connection fitting from the foam

compressor and pull out the filter housing.

2. Remove the filter from the housing.

3. Replace the filter (recommended) or wash it under running water for a

temporary fix.

4. Reassemble the parts.

Clean the soap tank

Clean out the tank prior to refill by flushing warm water through the hoses and

pump until clean water is released from the spout. TIP: Keeping a spare tank will

enable this process to be completed in a speedy and hygienic manner with minimal

downtime.

Dolphin

BC 633F