Dolphin Dolphin Blue BCL632F Manuel d'installation et d'entretien - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dolphin Dolphin Blue BCL632F. Dolphin Dolphin Blue BCL632F 17 pages. Panel mounted foam soap dispenser
Également pour Dolphin Dolphin Blue BCL632F : Manuel d'installation et d'entretien (19 pages)
Imprimer la page
INSTLLATION
S T E P 3 . C O N N E C T I N G T H E P O W E R S O U R C E
1. Remove the protective sticker
covering the sensor.
2. Connect the matching connector
from the foam dispenser body to the
compressor unit, and the compressor
unit to the pump connector. Please
note that since the connector is water
proof, some pressure must be applied
for a prefect seal.
IMPORTANT: the 4 contacts connector should be connected properly so that the
white o-ring is not visible and a clicking sound is heard.
PAY ATTENTION: If the 4 contacts connectors are not connected properly, the soap
dispenser pump will not operate properly.
3. Plug the transformer into the
electricity socket and connect the
transformer connector
4. Wait about 10 seconds before
placing your hands in the sensor
range to avoid adjustment mode.
BCL632F
8
|
Dolphin Blue
|