Dolphin Dolphin Blue BCL632F 설치 및 유지 관리 매뉴얼 - 페이지 8

{카테고리_이름} Dolphin Dolphin Blue BCL632F에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin Dolphin Blue BCL632F 17 페이지. Panel mounted foam soap dispenser
Dolphin Dolphin Blue BCL632F에 대해서도 마찬가지입니다: 설치 및 유지 관리 매뉴얼 (19 페이지)

페이지 인쇄

Dolphin Dolphin Blue BCL632F 설치 및 유지 관리 매뉴얼

INSTLLATION

S T E P 3 . C O N N E C T I N G T H E P O W E R S O U R C E

1. Remove the protective sticker

covering the sensor.

2. Connect the matching connector

from the foam dispenser body to the

compressor unit, and the compressor

unit to the pump connector. Please

note that since the connector is water

proof, some pressure must be applied

for a prefect seal.

IMPORTANT: the 4 contacts connector should be connected properly so that the

white o-ring is not visible and a clicking sound is heard.

PAY ATTENTION: If the 4 contacts connectors are not connected properly, the soap

dispenser pump will not operate properly.

3. Plug the transformer into the

electricity socket and connect the

transformer connector

4. Wait about 10 seconds before

placing your hands in the sensor

range to avoid adjustment mode.

BCL632F

Dolphin Blue