Dolphin pro HD+ 24V100A Manuel technique - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Dolphin pro HD+ 24V100A. Dolphin pro HD+ 24V100A 16 pages.

Imprimer la page

SAFETY PRECAUTIONS

NOT-DOLPROHD-00

(green/yellow wire in the mains power

cable). Refer to the wiring diagram for

more information.

4To prevent overheating, check that

cables are the specified section and that

connections are tight.

IMPORTANT: The charger is not protected

against batteries being connected with

reverse polarity. A wrong connection on

the battery side automatically destroys

the battery fuses and causes permanent

damage to the electronics board.

Startup precautions.

4In order to prevent any risk of electric

shock when switching on or during

operation, the protection cover must be

installed and properly screwed to the

mount.

4The charger complies with applicable

regulations

concerning

interference and immunity to external

interference (see EMC paragraph in the

Technical Specifications section).

4When operating the charger, ensure

that it is not subjected to conducted or

radiated interference at levels above

the legal limits (e.g. charger too close to

a powerful transmitter), as such exposure

may cause malfunctions.

4Also, the charger emits conducted

and radiated interference at levels

compliant with applicable regulations.

Ensure that other equipment, used close

to the charger, is electro-magnetically

compatible, otherwise malfunctions may

be caused.

SAFETY PRECAUTIONS

NOT-DOLPROHD-00

Charger serial number

The serial number is shown on the grey

or white label, bonded on one of the

sides of the charger. The serial number is

vertical. The first two digits indicate the

year of manufacture (e.g. 15 for 2015),

followed by a letter indicating the month

of manufacture (e.g. C for the month

of March), followed by a 5-digit number

which is the charger number within the

series.

Using a charging cycle that is incompatible

with the battery technology may seriously

damage the battery.

This is particularly true for cycles with

charge voltages that exceed the battery

manufacturer's recommended charge

voltage.

Example: Considerable risk of battery

overheating and release of gases that

emitted

represent a health hazard.

Curve No. 9 is compatible with a LiFeSo4

battery, on condition that the battery

has a BMS (Battery Management System)

protection function.

You

manufacturer's recommendations when

selecting the charge cycle.

Important

Note on the choice of charge curve

should

refer

the

battery