Cypress Semiconductor CYALKIT-E03 Manuel du kit - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel du kit pour {nom_de_la_catégorie} Cypress Semiconductor CYALKIT-E03. Cypress Semiconductor CYALKIT-E03 19 pages. Solar-powered bluetooth low energy sensor beacon 5 pack
Également pour Cypress Semiconductor CYALKIT-E03 : Manuel de démarrage rapide (2 pages)
Imprimer la page4.2 How to Install the Board in the Enclosure
Use the following is steps to install the Solar BLE Sensor board in the enclosure.
Set the transparent sheet to top cover as shown below.
1.
Adjust the position of the circle mark on the bottom cover and SW1 on the Solar BLE Sensor. Put in the Solar BLE
2.
Sensor in the bottom cover.
Adjust the position of the circle mark on the top cover and SW1 on the Solar BLE Sensor. Install the top cover on the
3.
bottom cover.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Transparent
sheet
Adjust the
position
Top Cover
Bottom Cover
Transparent sheet is fixed by snap
fit
Enclosure
17