Cypress Semiconductor CYALKIT-E03 키트 매뉴얼 - 페이지 17
{카테고리_이름} Cypress Semiconductor CYALKIT-E03에 대한 키트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Semiconductor CYALKIT-E03 19 페이지. Solar-powered bluetooth low energy sensor beacon 5 pack
Cypress Semiconductor CYALKIT-E03에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
4.2 How to Install the Board in the Enclosure
Use the following is steps to install the Solar BLE Sensor board in the enclosure.
Set the transparent sheet to top cover as shown below.
1.
Adjust the position of the circle mark on the bottom cover and SW1 on the Solar BLE Sensor. Put in the Solar BLE
2.
Sensor in the bottom cover.
Adjust the position of the circle mark on the top cover and SW1 on the Solar BLE Sensor. Install the top cover on the
3.
bottom cover.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Transparent
sheet
Adjust the
position
Top Cover
Bottom Cover
Transparent sheet is fixed by snap
fit
Enclosure
17