Cyrus CD i Instructions pour l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Cyrus CD i. Cyrus CD i 15 pages. Hi-fi
Également pour Cyrus CD i : Instructions pour l'utilisateur (18 pages)

Imprimer la page
Cyrus CD i

Program Memory Storage

The CD i has two program modes – Program and Exclude. Program sets
the CD i to play the sequence of tracks you like, Exclude sets the CD i
to skip the tracks you don't like. To set the CD i to Program or Exclude a
selection of tracks, follow this sequence-
1.
Load a disc.
2.
Press the STORE key on the remote control once to set Program
mode (the display will read 'Enter Tracks') or twice to set Exclude
mode (the display will read 'Skip Tracks').
3.
Enter the sequence of tracks to be stored (or skipped) with the remote
control numeric keypad. A maximum of 30 tracks may be stored in the
program memory. If an error is made in the programming sequence,
pressing the STOP/EJECT key will cancel the last entry.
4.
When all the tracks have been stored, press the STORE key again
(the display will now read 'Program Ready'.
5.
Press play to begin playing the tracks in the programmed sequence.
NOTE:
1.
'MEMORY FULL' indication will show on the display when the program
stored exceeds 30 tracks or a stored program time of 100 minutes
or greater.
2.
When engaging STOP while a program is stored, an extra press is
needed to clear the memory. Thus:
•
Press STOP/EJECT once to stop the disc.
•
Press STOP/EJECT a second time to clear the memory.
•
Press STOP/EJECT a third time to eject the CD.
•
One continuous press will accomplish all operations.

front panel display

a
5
Reading...

Key to the front Panel display drawing:

1.
Track Display (Two Digit)
Track number, disc reading and error display.
2.
Mode Indicator
Indicates the current operation mode (play, pause etc.)
3.
Time Display
When the disc is stopped this indicates the total time.
When the disc is playing, either elapsed time for the current track or
4.
time remaining to the end of the disc will be shown.
5.
Repeat Indicator
This symbol indicates that repeat is set.
6.
Memory Display
Indicates when a program is stored in the memory.
7.
Text display area
For status messages.
5
User Instructions
b
c
3:25
d
-10:15
e
3:25
f
3:25
g