Cyrus CD i 사용자 지침 - 페이지 7
{카테고리_이름} Cyrus CD i에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrus CD i 15 페이지. Hi-fi
Cyrus CD i에 대해서도 마찬가지입니다: 사용자 지침 (18 페이지)
페이지 인쇄Cyrus CD i
Program Memory Storage
The CD i has two program modes – Program and Exclude. Program sets
the CD i to play the sequence of tracks you like, Exclude sets the CD i
to skip the tracks you don't like. To set the CD i to Program or Exclude a
selection of tracks, follow this sequence-
1.
Load a disc.
2.
Press the STORE key on the remote control once to set Program
mode (the display will read 'Enter Tracks') or twice to set Exclude
mode (the display will read 'Skip Tracks').
3.
Enter the sequence of tracks to be stored (or skipped) with the remote
control numeric keypad. A maximum of 30 tracks may be stored in the
program memory. If an error is made in the programming sequence,
pressing the STOP/EJECT key will cancel the last entry.
4.
When all the tracks have been stored, press the STORE key again
(the display will now read 'Program Ready'.
5.
Press play to begin playing the tracks in the programmed sequence.
NOTE:
1.
'MEMORY FULL' indication will show on the display when the program
stored exceeds 30 tracks or a stored program time of 100 minutes
or greater.
2.
When engaging STOP while a program is stored, an extra press is
needed to clear the memory. Thus:
•
Press STOP/EJECT once to stop the disc.
•
Press STOP/EJECT a second time to clear the memory.
•
Press STOP/EJECT a third time to eject the CD.
•
One continuous press will accomplish all operations.
front panel display
a
5
Reading...
Key to the front Panel display drawing:
1.
Track Display (Two Digit)
Track number, disc reading and error display.
2.
Mode Indicator
Indicates the current operation mode (play, pause etc.)
3.
Time Display
When the disc is stopped this indicates the total time.
When the disc is playing, either elapsed time for the current track or
4.
time remaining to the end of the disc will be shown.
5.
Repeat Indicator
This symbol indicates that repeat is set.
6.
Memory Display
Indicates when a program is stored in the memory.
7.
Text display area
For status messages.
5
User Instructions
b
c
3:25
d
-10:15
e
3:25
f
3:25
g