Ask HDEX0018M1 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ask HDEX0018M1. Ask HDEX0018M1 6 pages. Mini hdmi wireless extender

Imprimer la page

Connection and Operation:

1. CONNECTION DIAGRAM

USB

DVD/PS3/STB/PC

1.1 Connect the HDMI input port of the HDMI wireless TX to the HDMI output port of the signal source by

HDMI cable.

1.2 Connect the HDMI output port of the HDMI wireless RX to the HDMI input port of the TV/Monitor by

HDMI cable.

1.3 Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to

the control target device.

1.4 Connect IR Receiver cable to the HDMI wireless RX.

1.5 Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment.

1.6 The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit

when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator

light will be lit also. The STATUS indicator flashes continuously during normal transmission.

1.7 Note: the antenna is located on the side near the IR interface, Please point these two faces towards

each other when placing them.

This side faces

Source remote control

HDTV Monitor/Projector

USB