Ask HDEX0018M1 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач Ask HDEX0018M1. Ask HDEX0018M1 6 сторінок. Mini hdmi wireless extender

Connection and Operation:

1. CONNECTION DIAGRAM

USB
DVD/PS3/STB/PC
1.1 Connect the HDMI input port of the HDMI wireless TX to the HDMI output port of the signal source by
HDMI cable.
1.2 Connect the HDMI output port of the HDMI wireless RX to the HDMI input port of the TV/Monitor by
HDMI cable.
1.3 Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to
the control target device.
1.4 Connect IR Receiver cable to the HDMI wireless RX.
1.5 Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment.
1.6 The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit
when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator
light will be lit also. The STATUS indicator flashes continuously during normal transmission.
1.7 Note: the antenna is located on the side near the IR interface, Please point these two faces towards
each other when placing them.
TX
This side faces
This side faces
RX
Source remote control
RX
TX
HDTV Monitor/Projector
USB