BluePoint Fasteners GT-100L Manuel de sécurité et d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de sécurité et d'utilisation pour {nom_de_la_catégorie} BluePoint Fasteners GT-100L. BluePoint Fasteners GT-100L 13 pages. Gas concrete nailer

Imprimer la page
Before actually beginning the nailing work, test the
Nailer by using the checklist below. Conduct the
tests in the following order. If abnormal operation
occurs, stop using Nailer and contact a dealer
authorized service center immediately.
(1) Remove all nails, Fuel Cell and Battery
from Nailer
■ All screws must be tightened.
■ The Firing Head and Trigger must move
smoothly while pulling back the Nail Feeder .
Trigger
Firing Head
Nail Feeder
(2) Installing theBattery.
Handle
Latch
Battery Pack
Insert
Do not operate the Firing Head or Trigger while
installing the Battery.
Make sure the Battery indicator light is flashing
green. If the Battery indicator light is flashing red, the
Battery doesn't have enough power and it needs to
be charged.
BATTERY INDICATOR LIGHT
Battery Indicated Light
12
Flashing GREEN: Enough power remaining
(The light turns steady during operation).
Flashing RED: Insufficient power remaining
(The light turns steady during operation).
(3) Insert Fuel Cell into Nailer.
open the Fuel Cell Base.
2
1
Fuel Cell Base
Insert the Fuel Cell into Nailer.
②
Fuel Cell
Insert the Stem of Fuel Cell into the hole of
③
Adaptor.
Adapter
Stem
Fuel Cell
Adapter
Stem
Fuel Cell
Close the Fuel Cell Base.
④
2
1
Fuel Cell Base
(5) Remove finger from the trigger and press the
firing head against the work surface. Fan
motor should start. DO NOT PULL THE
TRIGGER.
DO NOT PULL
THE TRIGGER
Depress firing
head against the
Nail Feeder
work surface
■ THE NAILER MUST NOT FIRE.
(6) Point the tool downward towards the work surface.
Do not contact the work surface. Pull the trigger
staying in that position for 5 seconds.
■ THE NAILER MUST NOT FIRE.
(7) Be sure and have the proper nail for the
application installed in the tool. Depress the tool
securely against the work surface. Hold stable
and pull the trigger.
Pull the trigger
■ THE NAILER MUST FIRE.
LOADING NAILS
WARNING
■ When loading nails into Nailer,
1) do not depress trigger;
2) do not depress firing head;
3) keep the Nailer pointed downward.
Nail Feeding Step
(1) pulling back the Nail feeder, till it is fixed.
(see chart a)
Nail Feeder
chart a
(2) Insert the the nails downward into the magazine
(see chart b).
Nail Feeder
Chart b
(3) Press the nail feeder (see chart c)and let it
forward against to the nails( see chart d).
Press Nail Feede
Chart c
Nail Feeder
Chart d
NOTE:
■ Use nail strip of more than 3 nails.
The Nailer is now ready to operate.
13