Ask Technology HDCN0019M1 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ask Technology HDCN0019M1. Ask Technology HDCN0019M1 7 pages. Hd multimedia integrator
Imprimer la page
Rocker Switch: Power switch (LED lights for power ON)
DC 5V: 5V DC in jack
LINK/ACT LED: Network port status indicator LED
(lights off: link fail, Light on: link ok, flash: Link ok and TX/ RX activity)
RJ45x4: 10/100M Ethernet interface
AUDIO IN L/R: Analog audio input (CVBS and S-video use the same Audio signal input channel)
CVBS IN: Composite video signal input port（AV IN）
SVIDEO IN: S-Video signal input port
AUX IN: Auxiliary audio input (this audio channel is used together with the VGA Video signal input)
VGA IN: VGA input port
HDMI IN1/2/3: HDMI input ports
HDMI OUT: HDMI output port
OPTICAL OUT: Optical/Toslink digital audio output
AUDIO OUT L/R: L/R analog audio output ports
: Power ON/standby
SVIDEO: Select SVIDEO for the input port
AV: Select CVBS for the input port
VGA: Select VGA for the input port
HDMI1/2/3: Select HDMI 1/2/3 for the input port
:
Source selection key
2CH：2CH LPCM mode. Switch to 2CH mode for the HDMI
source to output LPCM 2 channels audio per the
built-in EDID. Then HDMI, OPTICAL, AUDIO output stereo audio.
5.1CH：5.1CH bitstream Mode. Switch to B5.1CH mode for the HDMI source to output bitstream
audio per the built-in EDID. Then HDMI, OPTICAL output 5.1CH audio, AUDIO not output.
ADV：HDMI pass mode. Switch to PASS mode for the HDMI source to output audio per the EDID of
connected TV or AV receiver, supports up to LPCM 7.1 channels.
: Sound Output mute
(HDMI/SPDIF/AUDIO output mute when Press this button, Press again for unmute)
(Note: Use after the battery separator film is pulled out)
FIG.1.2 Remote Panel View