Ask Technology HDCN0019M1 사용자 설명서 - 페이지 4

{카테고리_이름} Ask Technology HDCN0019M1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ask Technology HDCN0019M1 7 페이지. Hd multimedia integrator

Rocker Switch: Power switch (LED lights for power ON)

DC 5V: 5V DC in jack

LINK/ACT LED: Network port status indicator LED

(lights off: link fail, Light on: link ok, flash: Link ok and TX/ RX activity)

RJ45x4: 10/100M Ethernet interface

AUDIO IN L/R: Analog audio input (CVBS and S-video use the same Audio signal input channel)

CVBS IN: Composite video signal input port（AV IN）

SVIDEO IN: S-Video signal input port

AUX IN: Auxiliary audio input (this audio channel is used together with the VGA Video signal input)

VGA IN: VGA input port

HDMI IN1/2/3: HDMI input ports

HDMI OUT: HDMI output port

OPTICAL OUT: Optical/Toslink digital audio output

AUDIO OUT L/R: L/R analog audio output ports

: Power ON/standby

SVIDEO: Select SVIDEO for the input port

AV: Select CVBS for the input port

VGA: Select VGA for the input port

HDMI1/2/3: Select HDMI 1/2/3 for the input port

Source selection key

2CH：2CH LPCM mode. Switch to 2CH mode for the HDMI

source to output LPCM 2 channels audio per the

built-in EDID. Then HDMI, OPTICAL, AUDIO output stereo audio.

5.1CH：5.1CH bitstream Mode. Switch to B5.1CH mode for the HDMI source to output bitstream

audio per the built-in EDID. Then HDMI, OPTICAL output 5.1CH audio, AUDIO not output.

ADV：HDMI pass mode. Switch to PASS mode for the HDMI source to output audio per the EDID of

connected TV or AV receiver, supports up to LPCM 7.1 channels.

: Sound Output mute

(HDMI/SPDIF/AUDIO output mute when Press this button, Press again for unmute)

(Note: Use after the battery separator film is pulled out)

FIG.1.2 Remote Panel View