Ega Master EGATRONIK Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ega Master EGATRONIK. Ega Master EGATRONIK 16 pages. Non-contact ac voltage detector
Également pour Ega Master EGATRONIK : Manuel d'utilisation (17 pages), Manuel d'utilisation (13 pages)
Imprimer la page
1. DC Output Terminal: DC analogue signal output. Output impedance is around 100Ω (10mV/
dB)
2. AC Output Terminal: AC analogue signal output. Output impedance is around 600Ω (0.707V/
each range scale)
3. CAL potentiometer: Calibration
4. External DC6V:Using power adaptor DC6V, output plug (3.5) to plug in the terminal. It can
use 4pcs of 1.5V batteries or power adaptor to power up the Meter.
MEASUREMENT OPERATION AND FUNCTIONAL BUTTONS
Below table indicated for information about the functional button operations:
Button
- Turn the Meter on and off. Press once to turn the Meter on. Press and hold for around
HOLD
- HOLD feature: During sound measure ment, press once to freeze the current reading
SIDE PANEL (see figure 3)
Operation Performed
1 second to turn the Meter off.
in the display. Press the button again to resume normal operation.
figure 3
5