Ega Master EGATRONIK 사용 설명서 - 페이지 5

{카테고리_이름} Ega Master EGATRONIK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ega Master EGATRONIK 16 페이지. Non-contact ac voltage detector
Ega Master EGATRONIK에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

1. DC Output Terminal: DC analogue signal output. Output impedance is around 100Ω (10mV/

dB)

2. AC Output Terminal: AC analogue signal output. Output impedance is around 600Ω (0.707V/

each range scale)

3. CAL potentiometer: Calibration

4. External DC6V:Using power adaptor DC6V, output plug (3.5) to plug in the terminal. It can

use 4pcs of 1.5V batteries or power adaptor to power up the Meter.

MEASUREMENT OPERATION AND FUNCTIONAL BUTTONS

Below table indicated for information about the functional button operations:

Button

- Turn the Meter on and off. Press once to turn the Meter on. Press and hold for around

HOLD

- HOLD feature: During sound measure ment, press once to freeze the current reading

SIDE PANEL (see figure 3)

Operation Performed

1 second to turn the Meter off.

in the display. Press the button again to resume normal operation.

figure 3