AMBIANCE BAIN REFLET SMART SATURN Instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} AMBIANCE BAIN REFLET SMART SATURN. AMBIANCE BAIN REFLET SMART SATURN 4 pages.

Imprimer la page

FITTING INSTRUCTION REFLET SMART SATURN MIRROR

Important :

• Carefully inspect the mirror before installation. If there are any problems, report it immediately to your dealer as no claim for damage will be considered after installation. No claims

for defects or damages will be accepted once the mirror has been installed.

• Mirrors are guaranteed for one year from date of invoice, no claim will be considered if product has not been installed and cared for as recommended in our ﬁtting and care ins-

tructions.

• The mirror may have defects which are naturally associated to the product. The visual inspection must take place at a minimum of 70cm. If the defect is not visible at this distance

the claim will not be accepted.

• For claims about defects appearing over time (e.g. de-silvering, ageing of glass etc.) the product must be inspected by a representative of Ambiance Bain to clarify if there is a

viable claim.

• The guarantee covers products in domestic use by the consumer only and not commercial or business use.

• Liability is limited to individual products and does not cover consequential loss/damage or any further unﬁtting/reﬁtting costs or ﬁnancial compensation.

• Installation must be made by a qualiﬁed professional, the guarantee will not apply if the product is incorrectly ﬁtted.

Maintenance :

• For mirrors, use a chamois leather, and dry the edges with a suitable soft cloth.

• Use a dry cloth to clean any electric components, they must be switched oﬀ

OUR MIRROR WILL DETERIORATE THROUGH EXCESSIVE WATER SPILLAGE OR HEAVY CONDENSATION. IT IS AD-

VISED THAT EVERY BATHROOM SHOULD BE WELL VENTILATED AND FITTED WITH A SUITABLE EXTRACTOR FAN TO

AVOID ANY PERSISTENT HUMIDITY TO PRESERVE THEIR QUALITY.

Electrical installation :

Mirrors with electrical components must only be installed in ZONE 3. Installation and ﬁtting of all electrical items

must be completed by a qualiﬁed electrician. Any ﬁnal decisions regarding the installation should also be made by

the electrician. All electrical items must be tested prior to installation, as liability is limited to replacement items only.

Installation and electrical connections must be carried out by qualified personnel only.

Carefully follow regulations regarding installation and system that are applicable in the country where the product is to be installed.

PLEASE NOTE

The article must be protected by a differential IΔn≤30mA

Before any operation (cleaning-changing light bulbs-installing luminaries) always disconnect the power supply.

Before installing, check that the position chosen is compliant with requirements for safety distances under the standards of the country where the product is to be installed.

The provide fastening system is suitable only for solid or brick walls.

The article is suitable for indoor use only, no humid area.

Install the article so that its metal parts do not touch the components of the electrical installation connected with earth conductor.

If wire and/or some other components are damaged, they must be immediately replaced with spare parts, this should be done only by specialized people, to ensure product

safety. The junction box must be built recessed into the wall, it must be made to insulated material and have a lid that closes complete, it also have a high protection level

PREPARATION OF THE INSTALLATION AREA

Set up a protected installation area (blancket)

Unpack carefully the mirror

Be careful do not damage with the stanley knife

Clean the mirror with a mild, non-greasy product on the front

All information is downloadable from the website

www.ambiancebain.com

tools required

c122V1.1