AMBIANCE BAIN REFLET SMART SATURN Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Засоби особистої гігієни AMBIANCE BAIN REFLET SMART SATURN. AMBIANCE BAIN REFLET SMART SATURN 4 сторінки.

FITTING INSTRUCTION REFLET SMART SATURN MIRROR
Important :
• Carefully inspect the mirror before installation. If there are any problems, report it immediately to your dealer as no claim for damage will be considered after installation. No claims
for defects or damages will be accepted once the mirror has been installed.
• Mirrors are guaranteed for one year from date of invoice, no claim will be considered if product has not been installed and cared for as recommended in our fitting and care ins-
tructions.
• The mirror may have defects which are naturally associated to the product. The visual inspection must take place at a minimum of 70cm. If the defect is not visible at this distance
the claim will not be accepted.
• For claims about defects appearing over time (e.g. de-silvering, ageing of glass etc.) the product must be inspected by a representative of Ambiance Bain to clarify if there is a
viable claim.
• The guarantee covers products in domestic use by the consumer only and not commercial or business use.
• Liability is limited to individual products and does not cover consequential loss/damage or any further unfitting/refitting costs or financial compensation.
• Installation must be made by a qualified professional, the guarantee will not apply if the product is incorrectly fitted.
Maintenance :
• For mirrors, use a chamois leather, and dry the edges with a suitable soft cloth.
• Use a dry cloth to clean any electric components, they must be switched off
OUR MIRROR WILL DETERIORATE THROUGH EXCESSIVE WATER SPILLAGE OR HEAVY CONDENSATION. IT IS AD-
VISED THAT EVERY BATHROOM SHOULD BE WELL VENTILATED AND FITTED WITH A SUITABLE EXTRACTOR FAN TO
AVOID ANY PERSISTENT HUMIDITY TO PRESERVE THEIR QUALITY.
Electrical installation :
Mirrors with electrical components must only be installed in ZONE 3. Installation and fitting of all electrical items
must be completed by a qualified electrician. Any final decisions regarding the installation should also be made by
the electrician. All electrical items must be tested prior to installation, as liability is limited to replacement items only.
Installation and electrical connections must be carried out by qualified personnel only.
Carefully follow regulations regarding installation and system that are applicable in the country where the product is to be installed.
PLEASE NOTE
The article must be protected by a differential IΔn≤30mA
Before any operation (cleaning-changing light bulbs-installing luminaries) always disconnect the power supply.
Before installing, check that the position chosen is compliant with requirements for safety distances under the standards of the country where the product is to be installed.
The provide fastening system is suitable only for solid or brick walls.
The article is suitable for indoor use only, no humid area.
Install the article so that its metal parts do not touch the components of the electrical installation connected with earth conductor.
If wire and/or some other components are damaged, they must be immediately replaced with spare parts, this should be done only by specialized people, to ensure product
safety. The junction box must be built recessed into the wall, it must be made to insulated material and have a lid that closes complete, it also have a high protection level
PREPARATION OF THE INSTALLATION AREA
1
Set up a protected installation area (blancket)
Unpack carefully the mirror
Be careful do not damage with the stanley knife
Clean the mirror with a mild, non-greasy product on the front
All information is downloadable from the website
www.ambiancebain.com
tools required
c122V1.1
UK
3