d&b audiotechnik Z Series Instructions de montage - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} d&b audiotechnik Z Series. d&b audiotechnik Z Series 11 pages. Al flying adapter
Également pour d&b audiotechnik Z Series : Instructions de montage (14 pages), Instructions de montage (8 pages), Instructions de montage (7 pages), Manuel de gréement (18 pages), Instructions de montage (12 pages), Instructions de montage (10 pages)

1.5 Installation

When the Rota clamp is fitted to the assembly as described in the

previous section, the assembled unit is now ready to install.

Proceed as follows:

1. First release the handwheel [2] of the clamping lever until it

reaches its end-position.

2. Fold out the clamping lever.

↳ When the support clamp is open, the assembly can now be

lifted into its operating position.

3. Close the two halves of the clamp around the bar.

4. Pull back the U-washer [U] of the clamping lever towards the

handwheel [2].

↳ No other adjustments should be made until the handwheel

has been tightened.

5. Fold back the clamping lever.

6. Hand-tighten the handwheel [2].

d&b Z5147 Mounting instructions 2.3 en