d&b audiotechnik Z Series 설치 지침 - 페이지 6

{카테고리_이름} d&b audiotechnik Z Series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z Series 11 페이지. Al flying adapter
d&b audiotechnik Z Series에 대해서도 마찬가지입니다: 설치 지침 (14 페이지), 설치 지침 (8 페이지), 설치 지침 (7 페이지), 리깅 매뉴얼 (18 페이지), 설치 지침 (12 페이지), 설치 지침 (10 페이지)

페이지 인쇄

1.5 Installation

When the Rota clamp is fitted to the assembly as described in the

previous section, the assembled unit is now ready to install.

Proceed as follows:

1. First release the handwheel [2] of the clamping lever until it

reaches its end-position.

2. Fold out the clamping lever.

↳ When the support clamp is open, the assembly can now be

lifted into its operating position.

3. Close the two halves of the clamp around the bar.

4. Pull back the U-washer [U] of the clamping lever towards the

handwheel [2].

↳ No other adjustments should be made until the handwheel

has been tightened.

5. Fold back the clamping lever.

6. Hand-tighten the handwheel [2].

d&b Z5147 Mounting instructions 2.3 en