Asko T731 Manuel d'utilisation et d'entretien - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Asko T731. Asko T731 20 pages. User manual use & care guide fr
Également pour Asko T731 : Manuel de démarrage rapide (2 pages), Manuel de planification et de conception (19 pages), Manuel d'utilisation et d'entretien (20 pages), (espagnol) Guide d'utilisation et d'entretien (20 pages), (French) Manual D’utilisation Et D’entretien (20 pages)

ERROR MESSAGES

Error messages will display on the LED if a fault occurs

while a program is in progress. The table below deﬁnes

each possible error message. If the message still displays

MESSAGE

ERROR

Call a service technician.

There may have been a power outage. Check the breaker box and fuses.

The dryer is programmed to stop after a maximum of 3 hours drying time. If it has run this long,

let it cool and try to start the program again.

Try turning the power off then on again. If the message remains, call a service technician.

This indicates a thermistor fault. Call a service technician.

This indicates the overheat protection device has activated. Clean the lint ﬁlter and try running

the program again.

This indicates a fault in the moisture sensor. Running a dry program with dry clothes or an empty

machine could also cause this error. Try opening the door. If the message remains, call a service

technician.

after you have checked the possible solutions, call a

service technician.

Page 15