Ambient Weather WS-40 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ambient Weather WS-40. Ambient Weather WS-40 7 pages. Wireless indoor / outdoor thermometer

Imprimer la page

ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F

and 140 °F.

1. Remove the battery door on the back of the sensor by removing the set screw, as shown in

Figure 1 .

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the

transmitter. Make sure all of the dip switches are in the down position (the WS-40 only

supports one wireless transmitter).

3. Temperature Units of Measure: To change the transmitter display units of measure (°F vs.

°C), change Dip Switch 4, as referenced in Table 1.

DOWN

---

4. Insert two AAA batteries.

5. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and

then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.

6. Verify the correct channel number (CH 1) and temperature units of measure (°F vs. °C) are on

the display, as shown in Figure 3.

Version 1.0

Figure 1

Figure 2

DIP SWITCH

DOWN

---

Table 1

FUNCTION

---

Channel 1 (WS40)

DOWN

°F

°C

Page 2