Ambiente WF0701LSR Instructions - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Ambiente WF0701LSR. Ambiente WF0701LSR 2 pages.

Cross section

Nuts

x 16

5. Connect hose to the pipe inlet of

the feature. Note: cut the hose up to connect

adjustor. Add flow adjustor on the hose.

Connect the other hose from adjustor to pump.

6. Place pump in the reservoir, add support

legs (which holds the weight of the feature)

Fill the reservoir up with water. Make sure

the pump is submerged. Wire the pump up

into 3 pin plug (10m cable).

7. Place the feature (bolted onto the lid)

on top of the reservoir.

8. Decorate by placing pebbles (not included)

around the reservoir lid.

Hose

Rod / thread

x 4

Plate

Washer

x 8

Insert

Reservoir

Pump

Note: Splashing may occur.

Please adjust the flow adjustor

to minimise splashing. Or drill

more holes to allow water to run

down quickly back into the reservoir.

Add flow adjustor

in the middle.

Bracket

Reservoir lid