Ambiente WF0701LSR 지침 - 페이지 2

{카테고리_이름} Ambiente WF0701LSR에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambiente WF0701LSR 2 페이지.

Cross section

Nuts

x 16

5. Connect hose to the pipe inlet of

the feature. Note: cut the hose up to connect

adjustor. Add flow adjustor on the hose.

Connect the other hose from adjustor to pump.

6. Place pump in the reservoir, add support

legs (which holds the weight of the feature)

Fill the reservoir up with water. Make sure

the pump is submerged. Wire the pump up

into 3 pin plug (10m cable).

7. Place the feature (bolted onto the lid)

on top of the reservoir.

8. Decorate by placing pebbles (not included)

around the reservoir lid.

Hose

Rod / thread

x 4

Plate

Washer

x 8

Insert

Reservoir

Pump

Note: Splashing may occur.

Please adjust the flow adjustor

to minimise splashing. Or drill

more holes to allow water to run

down quickly back into the reservoir.

Add flow adjustor

in the middle.

Bracket

Reservoir lid