Ambiente WF3622 Instructions d'installation
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Ambiente WF3622. Ambiente WF3622 2 pages. Ammonite curly swirly water feature small & large
Imprimer la page
Congratulations on your purchase!
We sincerely hope you are satisfied with your new product.
Here are a few points to help you prolong the life of your feature.
Ambienté recommends
Fountain Safe should be used all year round. This will help to reduce
maintenance and to maintain the lustre of your feature by
slowing or stopping the build up of algae etc.
Frost Free should be added to the feature as the colder
months draw in. It lowers the freezing point of water
helping to prevent frost damage. If water freezes in a
fountain, it will expand and crack the feature.
All water features should be drained, dried and covered before severe
frost or snow.
For pumps to function properly, they need to be completely free of air bubbles.
Whilst submerged, a gentle shake or tap should be sufficient to dislodge any
such bubbles.
If excessive noise is coming from the pump this could be due to either trapped air
or the pump rattling against the sides of the reservoir. Please ensure the pump is
"suckered" to the base of the reservoir by the rubber feet.
For regular pump maintenance
2
1
Pull off filter
Remove filter (if
cover as shown
present) and rinse
in water
For more information:
Web: www.ambientewaterfeatures.co.uk
Address: Ambienté – Fynzi Limited, 173 Curie Avenue, Didcot, OX11 0QG
Phone number: UK: 0800 161 3832
Int: +44 (0)2087 785 612
Email: [email protected]
4
3
Open impeller
Rinse all parts
cover, then
carefully and
impeller can easily
thoroughly
be removed
F3622
Installation
The Ammonite (Curly Swirly)
Water Feature Small & Large
Instruction