Amcargobikes Classic Petunjuk Merakit - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Merakit untuk Sepeda Amcargobikes Classic. Amcargobikes Classic 16 halaman. Cargo bike with mechanical disc breaks

Halaman Cetak

Picture 2C

• The two brake calibers are mounted with the 2x2 black allen key bolts. Notice: use 2-3 extra

washers per allen key bolt to ensure a good distance from the end of the bolt to the break disc.

See picture 2E.

• The position of the brake calibers versus the brake discs are adjusted via the blank allen key-

disc on the outside og the caliber and the side-by-side adjustment bolts on the brake caliber –

see picture 2F and 2G

• The brake discs should in this way run freely without touching the brake pads when the wheel

is turned. It is however OK if there is a small "whisling" sound from the brake when the wheel is

turned – this will disappear after a few days of use

• Then the bike is turned (see picture 2H).

• 2 brake calibers

• 2x2 black allen key bolts

with 2-3 ekstra washers

Page 6

Picture 2D