Floe 8000 Manual Petunjuk Perakitan - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Sistem Pengangkatan Floe 8000. Floe 8000 8 halaman. 24 volt vsd drive

steP 5 - - - - - - - - - - - - - - - - -

Fig. 5A

Plug 4 connector wired remote into the corresponding lead of the Advanced System

Control box. Note: The wired remote lead is identified by the blue wire tie next to the base

of the plug on the ASC as shown. Plug the 4 connector limit switch lead protruding from

the bottom of the limit switch housing to the corresponding plug on the ASC.

Note: The ASC Limit switch plug does not have a color coded cable tie attached.

(Fig. 5A) Attach the adhesive-backed tool kit to the lift frame, so that these tools are

readily available when needed, by cleaning the area above the tool kit decal and

removing the protective backing and pressing it to the corner post as shown in (Fig. 5B).

Fig. 5B

TOOL KIT

Page 7 of 8