Flomec QS200 Panduan Pemilik Produk - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik Produk untuk Aksesori Flomec QS200. Flomec QS200 16 halaman. Insertion ultrasonic flowmeter options for large pipe sizes
Juga untuk Flomec QS200: Panduan Instalasi (8 halaman), Panduan Pemilik Produk (20 halaman)

Halaman Cetak
Flomec QS200 Panduan Pemilik Produk
INSTALLATION ( CONTINUED )
Place the marked sleeve back into saddle, engaging the threaded studs to the depth
marked. Twist the bottom nuts upward to bottom of sleeve flange, replace the two nuts
removed earlier and tighten all nuts with 7/16 wrench. See Figure 5.
TIGHTEN DOWNWARD
TIGHTEN UPWARD
PERMANENT MARK
Figure 5
Step 4 – Mounting the Sensor:
Note the flow arrows on the side of the sensor, these must point downstream. Insert sensor
into sleeve, press down until hole in sensor matches hole in sleeve. Insert retention pin.
Final sensor depth should match that shown in Figure 6.
.060
.030
Figure 6
TIGHTEN DOWNWARD
TIGHTEN UPWARD
9