AME 11076 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan AME 11076. AME 11076 8 halaman. Diamondback aluminum tire bead breaker with carrying case
Halaman CetakINSTRUCTION MANUAL
3. Position the bead breaker so that the jaw makes solid contact with the rim
and the teeth are positioned in the crevice between the bead of the tire and
the rim.
NOTE
When a tire has a trash guard, you may have to drive two straight tire irons
between the rim and the tire bead to get a starting point for the teeth.
4. Step on the PUMP end of the pump pedal. The clamping rod will begin to
extend and the jaw will grip the rim.
The AME 11075 includes a clamping jaw pivot pin which can be placed in one
of four jaw pivot positions for use on different width flanges. The top hole
(closest to the handle) is used for smaller rim flanges, and the bottom hole
(furthest from the handle) is used for larger rim flanges.
The AME 11075 has four jaw Pivot positions.
Bead Breaker with pin in highest position
Bead Breaker with pin in lowest position
- 4 -
AME INTERNATIONAL