AME 11076 사용 설명서 - 페이지 4

{카테고리_이름} AME 11076에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AME 11076 8 페이지. Diamondback aluminum tire bead breaker with carrying case

INSTRUCTION MANUAL

3. Position the bead breaker so that the jaw makes solid contact with the rim

and the teeth are positioned in the crevice between the bead of the tire and

the rim.

NOTE

When a tire has a trash guard, you may have to drive two straight tire irons

between the rim and the tire bead to get a starting point for the teeth.

4. Step on the PUMP end of the pump pedal. The clamping rod will begin to

extend and the jaw will grip the rim.

The AME 11075 includes a clamping jaw pivot pin which can be placed in one

of four jaw pivot positions for use on different width flanges. The top hole

(closest to the handle) is used for smaller rim flanges, and the bottom hole

(furthest from the handle) is used for larger rim flanges.

The AME 11075 has four jaw Pivot positions.

Bead Breaker with pin in highest position

Bead Breaker with pin in lowest position

- 4 -

AME INTERNATIONAL