Coalesse Topo Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan Coalesse Topo. Coalesse Topo 10 halaman. Biplane

Halaman Cetak
7.
Insert dowels (lightly hammer into place) and
pins into holes on backsplash (7a). Align the
backsplash with rear of worksurface (7b). Locate
cams underneath back of worksurface and turn
each about a 1/2 turn clockwise to secure
backsplash to worksurface (7c).
BACKSPLASH
7a
DOWEL
PIN
BACKSPLASH
NOTE: If a power strip has been ordered,
install per the installation instructions with
the power strip before step 7.
7b
8.
Drive remaining screw for PVD box into
backsplash.
TIP: Remaining screw may require the use
of a hand phillips screwdriver to tighten.
VIEW LOOKING UNDERNEATH
REAR OF WORKSURFACE
8
7c
CAM
Page 6 of 10
939500422 Rev D