Coalesse Topo 조립 지침 매뉴얼 - 페이지 6
{카테고리_이름} Coalesse Topo에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse Topo 10 페이지. Biplane
페이지 인쇄7.
Insert dowels (lightly hammer into place) and
pins into holes on backsplash (7a). Align the
backsplash with rear of worksurface (7b). Locate
cams underneath back of worksurface and turn
each about a 1/2 turn clockwise to secure
backsplash to worksurface (7c).
BACKSPLASH
7a
DOWEL
PIN
BACKSPLASH
NOTE: If a power strip has been ordered,
install per the installation instructions with
the power strip before step 7.
7b
8.
Drive remaining screw for PVD box into
backsplash.
TIP: Remaining screw may require the use
of a hand phillips screwdriver to tighten.
VIEW LOOKING UNDERNEATH
REAR OF WORKSURFACE
8
7c
CAM
Page 6 of 10
939500422 Rev D