10Bar Underwater Housing Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera 10Bar Underwater Housing. 10Bar Underwater Housing 15 halaman. Underwater housing for olympus e-pl2
Juga untuk 10Bar Underwater Housing: Panduan Pengguna (16 halaman)

4. Set-up Instructions

Special Note on Responsibility for Watertight Integrity
Each housing is individually inspected and hydrostatically tested in the factory. However, the
responsibility for ensuring the integrity of the watertight seal lies entirely with the user. 10Bar accepts no
liability for damage to, or loss of any equipment used with, or placed inside the housing. It is highly
recommended that an in-water test of the housing without the camera be carried out before the first dive,
after changing ports or alteration of housing configuration. This simple test can be done by lowering the
housing with ballast to the expected diving depth and then retrieved to check for leaks.
Stainless Steel Locking Latch
The clear acrylic lid is secured to the housing by three Stainless Steel Locking Latches.
Locking Latches are simple, yet extremely secure mechanisms for locking down the housing lid.
Opening the Lid
Open the lid as illustrated below.
1
Latch in Locked Position
3
Align the Catch Under the Hook
Lift Tab at End of Lever Out and Up to Unlock
Lift Tab at End of Lever to Push the Hook and Lid Up
2
4
6