10Bar Underwater Housing Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera 10Bar Underwater Housing. 10Bar Underwater Housing 16 halaman. Underwater housing for olympus e-pl2
Juga untuk 10Bar Underwater Housing: Panduan Pengguna (15 halaman)

Halaman Cetak

Control Buttons Details

1. Flash Off

Press the lever down to turn off the flash.

Make sure that the Flash is turned off before removing the camera from the housing.

Bulkhead

For connecting the sync cord.

Unscrew the rubber protective plug and install the sync cord.

Always keep the rubber protective plug in place if sync cord is not installed.

3. Mode Dial

Turn to select the shooting mode.

4. Power On / Off

Press to power on and off.

5. Shutter

Press down to activate the shutter.

6. Key Hole Lock

Press down and turn to lock and unlock the lid.

7. Flash On

Turn button counter clockwise to turn on the flash.

Make sure that the Flash is turned off with Flash Off Lever (1) before taking the camera out from

the housing.

8. Movie

Press to start or stop recording video.

9. Close-up Playback

Press to zoom in on frame.

10. Info

Press to activate the Info button.

11. Index / Calendar Display

Press to activate Index / Calendar Display.

12. Exposure Compensation

Press to activate exposure compensation.

13. Single-Frame Playback

Press to display most recent photograph or video.

14. AF Target

Press to activate the AF Target button.

15. OK

Press to activate the OK button.

16. Delete

Press to delete an image.

17. Menu

Press to display the menus.

18. Sequential Shooting / Self-Timer

Press to activate.

19. Flash / Control Dial

Press to display flash options.

Press and turn to rotate the Control Dial.

20. Housing Lid

Clear acrylic back cover of the housing.