Aktakom ATH-2231 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Catu Daya Aktakom ATH-2231. Aktakom ATH-2231 15 halaman.

1.1 BEFORE USE

1. Make sure the POWER switch is pressed and connect the power cord to the power supply.

2. To set the constant voltage output: Power on the power supply. Adjust the VOLTAGE tune knob for

adjustment. Once the voltage or current value is reached, the desired value will appear on the Display

Panel.

1. Ensure the voltage and current is set to zero, prevent an undesired output for damaging the circuit.

2. The supplied voltage should be within 110V AC or 220V AC±10 %( 50Hz) and the system is capable for

supplying the maximum power consumption as indicated on section 3.3.

3. Keep a distance at least greater than 10cm between the power supply and other things for airy reason

when usage. Do not place this power supply in a hot, dusty. Wet, corrosive gas stage or near the poison

substance.

4. The power supply needs to warm up for 30 minutes, to meet the specification please refer to Section 3.4.

5. Keep hands and face away from the ventilation fan.

6. Do not touch the rear panel during operation.

1. Once the operation completed, remove all connections from the power supply, especially the power

source.

2. Wait for the power supply to cool down.

3. Store in a dry, well air and non-dusty environment.

AKTAKOM ATH-22xx series is a high performance and precision multi channels DC regulated power supply

up to 2 channel outputs. ATH-22xx series has constant voltage mode, constant current mode, auto current cut

off protection function, overload protection and auto tracking mode .In auto tracking mode, ATH-22xx series

can auto connect CH1 and CH2 output either in parallel or in series internally to provide double current or

voltage output.

With the extract stability and enhanced responsibility, this power supply is suitable for bench, laboratory,

university, high school, and enterprise use or where needed a high performance and precision regulated DC

power supply.