AEROBASK EPIC E1000 Panduan Pemilik - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan AEROBASK EPIC E1000. AEROBASK EPIC E1000 19 halaman.

Halaman Cetak

THE S-TEC 5000 AUTOPILOT

The Genesys S-TEC 5000 autopilot device is situated

below the center display.

AP: This button activates or de-activates the

●

autopilot.

FD: This button shows or hides the flight director

●

bars on the PFD. The flight director shows you the

direction and altitude you need to fly in order to reach

a set target heading and target altitude.

YD: This button activates or de-activates the yaw

●

damper.

HDG: This button activates the autopilot's heading

●

hold mode. The autopilot will follow the heading bug

you set on the PFD's HSI.

NAV: This button activates the autopilot's navigation

●

mode. The autopilot will follow the active navigation

source. Change the navigation source with the „HSI

SRC" softkey in the PFD menu.

APR: This button activates the autopilot's approach

●

mode. Use this button for capturing the localizer and

glideslope of an ILS approach.

LVL: This button activates the autopilot's level mode,

●

in which the autopilot will level the wings of the plane.

IAS: This button activates the IAS hold mode. The

●

autopilot will try to hold the indicated airspeed set on

the PFD's speedtape.

VS: This button activates the vertical speed mode.

●

The autopilot will try to climb or descend with the

speed selected with the

autopilot will climb or descend to the altitude pre-

selected with the

"ALT SEL"

ALT: This button activates the altitude hold mode.

●

The autopilot will hold the current or pre-selected

altitude.

MNU: – not used in simulation –

●

ALT SEL: This knob is used to pre-select an altitude

●

for the autopilot's VS and ALT modes.

"UP/DN"

buttons. The

knob.