Canon CR-N700 Panduan Instalasi
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kamera Digital Canon CR-N700. Canon CR-N700 4 halaman. Remote camera
Halaman Cetak
1
2
Remote Camera
DIE
0575
000
-
-
ENGLISH
Installation Guide
Important Information
© CANON INC
.
2022
Printed in Japan
•
Imprimé au Japon
This "Installation Guide
Important Information" is comprised of pages [1
/
Please be sure to read the "Safety Precautions" section for correct use
reading this "Installation Guide
,
keep it in a readily
/
Important Information"
accessible location for future reference
This camera is for indoor use only
.
•
The cameras described in this document may include models not
available in your country and
or region
/
.
•
HDMI is a trademark or registered trademark of HDMI Licensing
Administrator
,
Inc
.
in the United States and other countries
.
All other company or product names used in this document are
•
trademarks or registered trademarks of their respective holders
•
The contents of this document are subject to change without any prior
notice
.
The latest user manuals and software
,
etc
.
for this product can be
downloaded from the following website
.
The user manuals explain the
camera settings and operations
Read them carefully before using the
.
camera to ensure correct use
.
global
canon
ncsp
.
/
Check Included Items
Camera
Ceiling Plate
Safety Wire 3 m
(
9
.
8 ft
.)
Wire Stopper
(
for safety wire
)
Camera
to
Mount Safety Wire 10 cm
3
94 in
-
-
(
.
.)
M3 Screw x 6
(
for camera mounting
,
camera
-
to
-
mount safety wire
stopper x 4
)
IR Remote Controller
Size AAA Battery x 2
(
for IR remote controller
)
Printed Materials
Symbols used in this manual
Parts indicated in the "Installation Guide
/
Important Information" [2
with this icon are not included with the camera
,
and should be prepared by
the user
.
Safety Precautions
Warning
Failure to follow the instructions may
result in death or serious injury
Do not install in the following places:
•
Places in direct sunlight
,
near heat
-
generating objects
,
or locations subject
to high temperatures
.
Places near fire sources or flammable solvents
alcohol
thinner
•
(
,
•
Humid or dusty places
.
•
Places subject to oily smoke or steam
.
Confined or enclosed places
•
.
Failure to do so may result in fire or electric shock
.
Notes on installation at high places
•
For installation or inspection of this camera
,
consult the dealer where you
purchased the product
.
Install the camera in a way that ensures sufficient holding strength
•
according to the mounting place such as the wall
sure that the mounting place can sufficiently support the total weight
including the mounting parts and reinforce it if necessary
•
Prepare fixing screws suitable for the location and type of surface the
camera is to be installed
.
Periodically check the mounting brackets and screws for rust and
•
loosening
.
•
Do not install in unstable places
,
places subject to significant vibration or
impact
or places subject to salt damage or corrosive gas
,
•
Be sure to attach the safety wire when installing the camera
•
Use the included ceiling plate to install the camera
only the tripod screws
.
Failure to do so may result in the camera falling or other accidents
General notes on the camera
•
If any defective conditions such as smoke
strange odors
damage or cracks on the external case are discovered
,
2] and [2
2]
/
/
.
immediately stop using the camera
,
remove it from the power supply
.
After
the LAN cable for PoE
++
power supply
),
and contact your nearest dealer
Place the external DC power supply near the power outlet and avoid
.
placing objects around the power plug so that the power can be turned off
immediately in the event of an emergency
Do not touch the camera or the connecting cables during a thunderstorm
•
Do not disassemble or modify the camera
•
•
Do not scratch
,
pull
,
or forcefully bend the cables
connections
.
Do not spray the camera with water
or otherwise make it wet
•
,
.
•
Do not touch the camera
,
the external DC power supply
power plugs
or power outlets with wet hands
,
Do not allow water
metal or other foreign objects to enter the camera
•
,
•
Do not use flammable sprays near the camera
Do not leave the external DC power supply
•
power supply
connected when the camera is not in use for long periods
)
•
Do not use flammable solvents such as alcohol
when cleaning the camera
.
Do not block the air intake or air exit vents
•
Failure to do so may result in fire or electric shock
Notes on Power Supply
When using a commercially available AC adapter
•
with the safety standards
.
•
Do not place heavy objects on the power cable
PoE
++
power supply
)
or pull
,
forcibly bend
Do not allow metal pins or debris to touch the power plug or terminals
•
•
Wipe any dust off of the power plug
.
Also
power outlet in a dusty area
,
take measures to prevent tracking
Make sure the power plug
or the LAN cable for PoE
•
(
seated all the way
,
and do not use it when the insertion is insufficient
•
Do not use a damaged power plug or a loose power outlet
manner that exceeds the rating of the wiring device such as connecting
multiple plugs to an outlet
.
Failure to do so may result in fire or electric shock
,
and wire
Notes on batteries
Do not put batteries in the fire
or do not heat
•
,
them
.
•
Do not charge the included batteries
.
Do not use batteries other than those specified
•
Failure to do so may result in fire or electric shock
Do not use the product at:
/
2]
•
Places where the use is prohibited
,
such as in hospitals and on airplanes
Places within reach of babies and toddlers
•
Use at such places can cause equipment to malfunction due to
radio waves and lead to accidents
or cause electric shock and
,
injuries
.
Caution
Failure to follow the instructions may
.
result in injuries or property damages
Notes on installation
Installation must be carried out safely and securely in accordance with the
•
fuel
etc
relevant regulations for technical standards of electrical installation
,
,
.).
Failure to do so may result in accidents
Notes on installation
Take care not to damage wiring or piping
•
Failure to do so may result in damage to surrounding items
General notes on the camera
,
ceiling
,
etc
.
Also
,
make
Do not touch the edges of metal parts with bare hands
•
•
Be careful not to get your fingers caught when installing
.
Failure to do so may result in injuries
Notes on batteries
•
Remove the batteries when they have been used up or will not be used for
a long time
.
When replacing the batteries
•
.
Also
,
do not use different types of batteries together
.
•
Make sure
+
and
-
of the battery are oriented correctly
.
Do not install it with
If any liquid from inside the battery gets on your body due to leakage
•
rinse it off thoroughly with water
.
Failure to do so may result in injuries and malfunctions
,
strange sounds
,
heat
,
Important
,
(
or
.
Do not install the camera in places where radiation
•
waves or strong magnetism are generated
audio disturbance
,
noise
.
We recommend the installation of a lightning arrester
•
.
device
)
as a measure against failures caused by lightning strikes
.
Take measures to remove static electricity before performing any
•
,
or put a load on their
procedures
.
•
Do not connect power supply cables to the BNC jacks as it may result
.
in damage
.
,
cable connectors
,
Do not connect the PoE cable to the RS
•
.
.
•
If there is condensation
.
dissipates
.
or the LAN cable for PoE
(
++
•
Do not hold the device by the camera head
.
Do not turn the camera rotator by hand
•
,
paint thinner or benzine
•
After turning off the power
five seconds
.
.
Do not point the camera at strong light sources
•
.
clear day or strong artificial light sources
the image sensor could be damaged
•
Do not carry the camera on a tripod
use one that complies
,
(
or the LAN cable for
,
scratch or modify it
.
Precautions for Use
.
,
if the connection is made to the
.
Compliance with Applicable Laws
power supply
is
++
)
that your use of this product may subject you to certain laws
.
regulations
,
including but not limited to
,
or use it in a
property and publicity laws
any resulting recordings or footage complies with applicable laws
regulations
.
.
Canon Inc
.
and its affiliates shall have absolutely no liability with respect
to any claims made by third parties that your use of this product does not
comply with applicable laws
short circuit or disassemble
brought against you by third parties alleging non
,
or otherwise violates any third party
or proprietary rights as a result of your use of the product
responsible to you for any liability whatsoever resulting from your use
.
installation of this product
.
Limited Warranty: Please check the in
about the limited warranty that pertains to your product
Installation: This product should NOT be installed outdoors
.
responsible for the proper installation of this product
.
by law
,
Canon Inc
.
and its affiliates shall have absolutely no liability to you
with respect to any damages or liabilities associated with the improper use of
or the installation of this product
or any third parties as a result of any such improper use or installation of this
product
,
whether or not the installation of this product was by you
third party
.
Privacy:
•
Do not install this product in areas where people have a reasonable
.
expectation of privacy
rooms
locker rooms and rest room facilities
,
• Some jurisdictions require signage disclosing the existence of camera
equipment. Please check your own area's laws for requirements.
Making audio recordings is heavily regulated and can vary significantly
•
.
by area
.
Please check laws in your jurisdiction before making any audio
.
recordings
.
OTHER IMPORTANT INFORMATION: Please see other important information
.
pertaining to the use of this product by reading our Settings Guide
can also be found at global
.
About lamp
.
.
.
Lamp
replace both batteries at the same time
,
.
STATUS lamp
.
.
,
.
.
POWER lamp
X
rays
strong radio
,
-
,
.
It may cause video and
,
or malfunctions
.
a surge protection
(
.
Tally lamp
For details on the location of each lamp
422 terminal
-
.
Important Information" [2
,
please wait to power on
,
until the condensation
.
Before using the camera
.
,
do not turn the power on again for at least
Initial settings
such as the sun on a
(
Be sure to make the initial settings before use
).
Internal components such as
made
.
details
.
SERVICE switch settings
Set the camera number and frame frequency of the output video to be
operated by the IR remote controller
Disclaimer
(
)
Switches should be set before turning on the power
intellectual Property Rights: Please note
/
,
rules and
,
privacy
,
wiretapping and intellectual
Please be sure your use of this product and
or
.
/
,
rules and
rules and regulations and any resulting claims
,
-
compliance with such laws
,
s intellectual property
personal
privacy
'
,
,
We are also not
.
,
and
/
or
and
or any loss of any recordings or footage
,
/
.
-
box materials for more information
.
.
You are solely
To the extent permitted
.
,
or for any personal injuries sustained by you
,
,
or by any
Notes for When and After
Installing the Camera
,
including but not limited to
,
bedrooms
,
dressing
.
When Installing the Camera
Installation at high places
,
which
canon
ncsp
prior to using this product
.
/
,
.
Lamp status
Status
Orange light
Standby
ON
Power shortage
PT position error
Orange light
Firmware being updated
BLINKING
Device failure
Cooling fan error
Orange light
Standby
ON
Green light
Power on
ON
Initializing
(
Starting and restarting
IR remote control signal received
Green light
Blinks twice
(
)
BLINKING
Moving to or returning from standby
Device failure
Cooling fan error
Red light ON Distributing data
Green light
Preparing to distribute data
ON
refer to the "Installation Guide
,
2]
/
.
.
If the initial settings are not
the video cannot be outputted
Refer to the "Settings Guide" for
,
.
.
.
.
Frame frequency
59.94 Hz
50.00 Hz
Caution
Request a professional installer for all
installation work
Never try to install the
.
camera yourself
Doing so may result in
.
unforeseen accidents such as dropping
the camera or electric shock
.
)
/