Air Cleaning Equipment Horizon Galaxy Panduan Instalasi dan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Dehumidifier Air Cleaning Equipment Horizon Galaxy. Air Cleaning Equipment Horizon Galaxy 16 halaman. Horizon series

Halaman Cetak

Troubleshooting

Symptom

Machine Won't

Run

Cannot start the

dehumidifier

Loud Noise

Trouble code:E1

Trouble code

Cause

Power Cord Connection

Room temperature Over

105 degree F or Below 33

Degree F

Air Filter Clogged

Air inlet or outlet jammed

Machine Not Level

Filter mesh jammed

E1 = Humidity Sensor

Issues.

Flashing Red =

Temperature Sensor

Issues

Disassembly: Remove wire tie

rotate the flex duct in

clockwise direction

Insure Plug Fully Inserted in

Outlet

Units Outside Operating

Temperature Range，Manual

restart of machine after room

returns to design conditions

Clean the filter mesh according

to instructions in manual

Clear the blockage from air

inlet or air outlet

Move to flat and firm ground

Clean the filter mesh according

to instructions in manual

Check to insure wire is

connected at both ends. If all

looks good, sensor may be

faulty.

Check to insure wire is

connected at both ends. If all

looks good, sensor may be

faulty.

Solution