Air Cleaning Equipment Horizon Galaxy Manual de instalação e operação - Página 14
Procurar online ou descarregar pdf Manual de instalação e operação para Desumidificador Air Cleaning Equipment Horizon Galaxy. Air Cleaning Equipment Horizon Galaxy 16 páginas. Horizon series
Imprimir páginaTroubleshooting
Symptom
Machine Won't
Run
Cannot start the
dehumidifier
Loud Noise
Trouble code:E1
Trouble code
Cause
Power Cord Connection
Room temperature Over
105 degree F or Below 33
Degree F
Air Filter Clogged
Air inlet or outlet jammed
Machine Not Level
Filter mesh jammed
E1 = Humidity Sensor
Issues.
Flashing Red =
Temperature Sensor
Issues
Disassembly: Remove wire tie
rotate the flex duct in
clockwise direction
Insure Plug Fully Inserted in
Outlet
Units Outside Operating
Temperature Range，Manual
restart of machine after room
returns to design conditions
Clean the filter mesh according
to instructions in manual
Clear the blockage from air
inlet or air outlet
Move to flat and firm ground
Clean the filter mesh according
to instructions in manual
Check to insure wire is
connected at both ends. If all
looks good, sensor may be
faulty.
Check to insure wire is
connected at both ends. If all
looks good, sensor may be
faulty.
14
Solution