Canon Color imageCLASS MF8170c Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Semua dalam Satu Printer Canon Color imageCLASS MF8170c. Canon Color imageCLASS MF8170c 8 halaman. Color laser copier printer scanner fax with network
Juga untuk Canon Color imageCLASS MF8170c: Petunjuk Instalasi (1 halaman), Petunjuk Tambahan (2 halaman), Manual Jaringan (48 halaman), Petunjuk Manual (8 halaman), Manual Ui Jarak Jauh (40 halaman), Spesifikasi (2 halaman)

Halaman Cetak
Canon Color imageCLASS MF8170c Petunjuk Manual

Install the toner cartridges.

1 Check the color marking on the cartridge
receptacle in the machine. Remove the toner
cartridge of the same color from the bag.
3 Remove the protective cover.
IMPORTANT
Do not touch the developing roller, sensors, electrical contacts or cartridge memory on a toner cartridge.
●
Toner cartridge
memory
Developing roller
5 Hold the cartridge as shown and insert it in
the machine as far as it will go.
7 Repeat steps 1 to 6 above until all four toner cartridges are installed. Then close the cartridge
cover and lower the scanning platform.
NOTE
If an empty cartridge receptacle does not appear, close the cartridge cover and follow the steps below:
●
1 Press [Menu] on the control panel ➝
to select <1.CHANGE CARTRIDGE> ➝ press [Set] ➝ <5.ALL COLORS> ➝ [Set].
2 Press
or
3 Open the cartridge cover and install the remaining cartridges one by one. The cartridge receptacles should appear in this order:
Protective
cover
to select <10.MAINTENANCE> on the LCD ➝ press [Set].
or
2 Rock the cartridge several times to distribute
toner inside.
4 Hold the cartridge on a flat stable surface with
one hand, and pull out the seal completely
with the other hand.
Electrical
contacts
Sensor
6 Close the cartridge cover and wait for the
cartridge cradle to rotate and stop, and then
open the cover again.
➝
➝
➝ K.
Y
M
C