Canon Color imageCLASS MF8170c 사용 설명서 - 페이지 5

{카테고리_이름} Canon Color imageCLASS MF8170c에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8170c 8 페이지. Color laser copier printer scanner fax with network
Canon Color imageCLASS MF8170c에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 추가 지침 (2 페이지), 네트워크 매뉴얼 (48 페이지), 사용 설명서 (8 페이지), 원격 UI 매뉴얼 (40 페이지), 사양 (2 페이지)

페이지 인쇄

Install the toner cartridges.

1 Check the color marking on the cartridge

receptacle in the machine. Remove the toner

cartridge of the same color from the bag.

3 Remove the protective cover.

IMPORTANT

Do not touch the developing roller, sensors, electrical contacts or cartridge memory on a toner cartridge.

●

Toner cartridge

memory

Developing roller

5 Hold the cartridge as shown and insert it in

the machine as far as it will go.

7 Repeat steps 1 to 6 above until all four toner cartridges are installed. Then close the cartridge

cover and lower the scanning platform.

NOTE

If an empty cartridge receptacle does not appear, close the cartridge cover and follow the steps below:

●

1 Press [Menu] on the control panel ➝

to select <1.CHANGE CARTRIDGE> ➝ press [Set] ➝ <5.ALL COLORS> ➝ [Set].

2 Press

3 Open the cartridge cover and install the remaining cartridges one by one. The cartridge receptacles should appear in this order:

Protective

cover

to select <10.MAINTENANCE> on the LCD ➝ press [Set].

2 Rock the cartridge several times to distribute

toner inside.

4 Hold the cartridge on a flat stable surface with

one hand, and pull out the seal completely

with the other hand.

Electrical

contacts

Sensor

6 Close the cartridge cover and wait for the

cartridge cradle to rotate and stop, and then

open the cover again.

➝

➝ K.